Join Us ::

Menu Home Classes GK Engineering Past Papers Current Affairs Technical GAT Subject Programming Medical Papers

Civil Engineering :: All Aptitude Test ::

Home » Engineering » Civil Engineering » Aptitude Test - 3
1.Which of the following is a hand tool used for quarrying ?
A. XSM
B. Quarrying wire
C. Hammer
D. XSM
2.What is sand blasting ?
A. Dressing type
B. Quarrying technique
C. Process of using sand to blast stone surface
D. Dressing type
3.Quarry faced finished stones are also called ?
A. Plain finish
B. Reticulated finish
C. Hammer faced finished
D. Plain finish
4.Circular finished stones are generally used for ?
A. Column
B. Landscaping
C. Tombstone
D. Column
5.How many types of dressings are there with respect to the place of work ?
A. 1 Type
B. 2 Types
C. 3 Types
D. 1 Type
6.Dressing of stones is carried out to ?
A. To provide employment to people
B. To reduce water content of stone
C. To avoid further works on the stone
D. To provide employment to people
7.What is used to accelerate the process of rubbing in rubbed finish dressing ?
A. Water
B. Water and sand
C. Clay
D. Water
8.Which of the following is not an explosive used for blasting ?
A. 10% less explosive for every 1m of LLR
B. 10% more explosive for every 1m of LLR
C. Higher the LLR, lesser the amount of explosive
D. 10% less explosive for every 1m of LLR
9.For a good building stone how much is the required crushing strength ?
A. Less than 50 N/mm2
B. Greater than 100 N/mm2
C. 155 N/mm2
D. Less than 50 N/mm2
10.The plan of the buildings and elevations and sections accompanying the notice shall be drawn to a scale ?
A. 1:10
B. 1:50
C. 1:100
D. 1:10
11.Subdivision/layout plan which shall be drawn on a scale of not less than ?
A. 1:100
B. 1:500
C. 1:1000
D. 1:100
12.Which a line usually parallel to the plot boundaries and laid down in each case by the Authority, beyond which nothing can be constructed towards the site boundaries ?
A. Building line
B. Control line
C. Property line
D. Building line
13.The ratio of the total floor area inclusive of all the floors to the area of the plot on which building stands is known as ?
A. Groundage
B. Plot area
C. Floor area
D. Groundage
14.The aggregate area of doors and windows shall not be less than of the floor area of room ?
A. 1/10
B. 1/9
C. 1/7
D. 1/10
15.The placing of various rooms or units of a structure in proper correlation of their functions and in due proximity with each other is known as ?
A. Aspect
B. Aspect
C. Aspect
D. Aspect
16.The term is used to mean the external views as seen from certain rooms of the building ?
A. Aspect
B. Prospect
C. Elegance
D. Aspect
17.The area on the earth which lies between the zones of cancer and Capricom is known as the ?
A. Tropic zone
B. Frigid zone
C. Torrid zone
D. Tropic zone
18.Landscape architecture comes under in which principle of planning ?
A. Function
B. Form
C. Aesthetic
D. Function
19.When building bye-laws came into force ?
A. April 1984
B. July 1983
C. April 1983
D. April 1984
20.Burning sun, fixed seasons and rainfall which is heavy, moderate and with storm are the typical features of ?
A. Cancer zone
B. Capricom zone
C. Torrid zone
D. Cancer zone
21.The tropical climate which consists of heat waves hot winds and low humidity comes under which climatic conditions ?
A. Hot-wet
B. Hot-dry
C. Cool-dry
D. Hot-wet
22.Which type of climate consists of high humidity throughout the year and even in the dry season with variations in day and night temperatures ?
A. Hot wet
B. Hot dry
C. Cool dry
D. Hot wet
23.Which building material have high Seismic resistance and flexibility of nailed joints ?
A. Bamboo
B. Timber
C. Ply
D. Bamboo
24.Pyramids are the best example of ?
A. Flood Resisting structure
B. Dust storm Resisting structure
C. Insulating structure
D. Flood Resisting structure
25.Which is the most important advanced technique of earthquake resistant design and construction ?
A. Flexible steel form
B. Reinforced concrete
C. Base Isolation
D. Flexible steel form
26.Determining the relative positions of points on above or beneath the surface of the earth by means of direct or indirect measurements of distance and direction and elevation is called as ?
A. Surveying
B. Levelling
C. Measuring
D. Surveying
27.Finding the elevations of a point with respect to a given or assumed and establish points given elevation or at different elevations with respect to given or assumed dactum is ?
A. Surveying
B. Levelling
C. Bearing
D. Surveying
28.Type of surveying in which the mean surface of the earth is considered as a plane and the spheroidal shape is neglected called as ?
A. Topographic Surveying
B. Hydrographic Surveying
C. Geodetic Surveying
D. Topographic Surveying
29.Type of surveying in which the shape of the earth taken into account is ?
A. Topographic Surveying
B. Hydrographic Surveying
C. Geodetic Surveying
D. Topographic Surveying
30.Horizontal projection of an area and shows only horizontal distances of the points is ?
A. Contour lines
B. Leveling
C. Surveying
D. Contour lines
Related Subjects

Date to Date Current Affairs 2022

PakMCQs.net

Quick Links

GAT Subject



   Computer Science    English Mcqs    Agriculture    

Engineering



   Computer Science    Civil Engineering    

Technical



   Networking    Electronics    Database    

Past Papers



   Model Papers    FPSC Papers    
Our Team | Career | Contact | JoinUs | Privacy Policy | DMC

© 2020-2025 by Pak-MCQs.net All Rights Reserved.

Email: [email protected]