Join Us ::

Menu Home Classes GK Engineering Past Papers Current Affairs Technical GAT Subject Programming Medical Papers

Engineering :: All Aptitude Test ::

Home » Engineering » Aptitude Test - 151
Hassan
1.The steel used in R.C.C. work is
A. stainless steel
B. mild steel
C. high carbon steel
D. stainless steel
2.Mastic asphalt is
A. water proof
B. fire proof
C. elastic
D. water proof
3.Non acid-resistant asbestos is :
A. tremolite asbestos
B. chrysolite abestos
C. amosite absestos
D. tremolite asbestos
4.Stones used for the construction of retaining walls must be
A. soft
B. hard
C. light
D. soft
5.Permanent magnets are made of high carbon steel and
A. 15% of cobalt
B. 20% of cobalt
C. 35% of cobalt
D. 15% of cobalt
6.Plastics are compounds of carbon with element
A. hydrogen
B. nitrogen
C. oxygen
D. hydrogen
7.Pick up the correct statement from the following:
A. The plastic bottles are made by the process of blowing
B. The plastic sheets are made by the calendering process in which the plastic material is allowed to pass between cylindrical rollers
C. The application of thermo-setting resins on sheets of paper, is called laminating process
D. The plastic bottles are made by the process of blowing
8.Pick up the constituent of good brick earth whose excess causes the raw bricks shrink and warp during drying and burning, from the following:
A. Alumina
B. Lime
C. Ironoxide
D. Alumina
9.Cast iron is used for
A. structural works in beams
B. small sized water pipes
C. columns and struts
D. structural works in beams
10.Stainless steel resists corrosion due to
A. carbon
B. sulphur
C. vanadium
D. carbon
11.Commonly used thinner in
A. lacquer paints, is alcohol
B. cellulose paints is ethyle acetate
C. oil paints, is naptha
D. lacquer paints, is alcohol
12.Good quality sand is never obtained from
A. river
B. nala
C. sea
D. river
13.Pick up the rock which is not a sedimentary rock from the following:
A. gravel
B. sand stone
C. gypsum
D. gravel
14.For a good building stone, its specific gravity should the greater than
A. 1.5
B. 1.7
C. 2.2
D. 1.5
15.Blister steel
A. is obtained by cementation process
B. is full of fissures and cavities
C. can not be forged
D. is obtained by cementation process
16.The most important constituent of varnish, is
A. drier
B. solvent
C. resin
D. drier
17.A ferrous metal is
A. cast iron
B. wrought iron
C. steel
D. cast iron
18.For making fly-ash building bricks, the following mix of fly-ash, sand and lime, is
A. 80:13:07
B. 70:20:10
C. 60:35:05
D. 80:13:07
19.Pick up the correct statement from the following:
A. Lime is available in free state
B. Lime is available by dissolving calcium carbonate in water
C. Lime is available by calcining calcium carbonate at 900°C
D. Lime is available in free state
20.Water paint is a
A. white wash
B. colour wash
C. whiting
D. white wash
21.Seasoning of timber is done
A. to make it water proof
B. to paint its surface
C. to increase its temperature
D. to make it water proof
22.The specific gravity of marble, is
A. 2.5
B. 2.6
C. 2.66
D. 2.5
23.The rocks having alumina or clay as their major constituents, are known as
A. siliceous rocks
B. argillaceous rocks
C. calcareous rocks
D. siliceous rocks
24.The curved swellings from the growth of layers or wounds left after branches are cut off in an irregular manner, are known as
A. knots
B. rindgalls
C. burls
D. knots
25.Pick up the correct statement from the following:
A. The percentage of absorption for firebricks varies from 5 to 10
B. The percentage of silica in silica bricks is to the extent of about 95 to 97 percent
C. Roughly 1 to 2 percent of lime in silica bricks is added to act as binding material
D. The percentage of absorption for firebricks varies from 5 to 10
26.Spirit varnish generally consists of
A. oil, wax and resin
B. alcohol, wax and turpentine
C. pigment and synthetic resin
D. oil, wax and resin
27.Pick up the correct statement from the following:
A. Roasting is not necessary if iron ore is an oxide
B. Impurities float on the molten iron as slag
C. The slag contains lime about 45%
D. Roasting is not necessary if iron ore is an oxide
28.The tendency of a stone is, to split along:
A. texture
B. fracture
C. cleavage
D. texture
29.Acrylic is the name of
A. cellulose resin
B. alkyd resin
C. methyl metha crylate
D. cellulose resin
30.Glazing of clay products, is done
A. to improve their appearance
B. to protect them from atmospheric effect
C. to protect them from corrosive action
D. to improve their appearance
Related Subjects

Date to Date Current Affairs 2022

PakMCQs.net

Quick Links

GAT Subject



   Computer Science    English Mcqs    Agriculture    

Engineering



   Computer Science    Civil Engineering    

Technical



   Networking    Electronics    Database    

Past Papers



   Model Papers    FPSC Papers    
Our Team | Career | Contact | JoinUs | Privacy Policy | DMC

© 2020-2024 by Pak-MCQs.net All Rights Reserved.

Email: [email protected]